Hum tech electronics
Electronics repair made easy
About UsMission statementCRT Television troubleshooting guideCRT Television repair courseBasic electronics course DVD Player repair guideCRT TV Repair Case Histories Vol.1CRT TV repair case histories Vol.2my blogRecommended booksFREE ebook DownloadContact UsSite Map
Basic electronics course

Basic electronics course


 

Dear electronics repairer, 

Basic electronics course is an E book covering all common electronics components (both passive and active) found in consumer electronics equipment like LCD television and  Monitors, CRT television and Monitors, DVDs, Hi-fi systems, Power amplifiers, Switch mode power supplies(S.M.P.S) etc.

After reading this book you will be able to identify the components using actual picture, symbol used to represent them on the circuit board, purposes it serves on the circuit, common failure modes and how to test if it is good or bad.


The book is highly recommended for new students in electronics, those who are in the field but have difficulties in understanding how circuits works to the advanced technician who want to refresh their knowledge in basic electronics as it provides a solid foundation for those who want to major in the world of electronics repairs


The book is illustrated with Color photos to make the reader learn faster and get the concept pretty fast.

Every Chapter is hyperlinked to the list of content for easy navigation within the book for those who decide to read the book directly from the computer screen,tablets and Iphones

The book is going for an introductory price of $ 14.95 USA dollars
Grab your copy NOW to avoid disappointment.

  




List of Content

Lesson 1: Introduction to basic electronics
  Lesson 2: Introduction to basic tools required in electronics repairs.

Lesson 3: Fuses:-identification, purpose, common failure mode & testing if good or bad.

 

Lesson 4: Metal Oxide Varistor (M.O.V):- identification, purpose, common failure mode & testing if good or bad.

Lesson 5: Thermsistors: - (Posistor and NTC) - identification, purpose, common failure mode & testing if good or bad.

Lesson 6: Inductors: - identification, purpose, common failure mode & testing if good or bad.

Lesson 7: Relays:-identification, purpose, basic relay circuit, relay used in power supply, common failure mode & testing if good or bad.

Lesson 8: Capacitors:-identification, types, Uses in circuit, understanding capacitor body markings, encoding ceramic capacitors body marking, how to discharge big capacitors, voltage rating of capacitors, common failure mode & testing if good or bad.

Lesson 9: Resistors:- identification, uses, fixed resistors, variable resistors(linear pot and log pot), resistor color code, resistor in series, connecting speakers in series/parallel, application of P.O.T in volume control, resistors in parallel circuit, common failure mode & testing if good or bad

 

Lesson 10: Diodes:- identification, various types of common diodes, power diodes, damper diodes, fast recovery diodes, signal diodes, Zener diodes, using zener diode as a voltage regulators, using zener diode for protection, light emitting diode(LEDs), common failure mode & testing if good or bad for each type.

Lesson 11: Transistors: - identification, uses in circuits, common failure mode & testing if good or bad

Lesson 12: Integrated circuit (I.C):- identification, pin arrangement, Tips on how to know if it is good or bad.

Lesson 13: Crystals and Resonators: - identification, types (Crystal oscillator & ceramic resonators) uses, testing if good or bad

Lesson 14: Voltage Regulators: - identification, types (positive and negative series), uses, testing if good or bad 

Lesson 15: Introduction to switch mode power supply (s.m.p.s)

Lesson 16: Conclusion